ESP32-S3 GPIO20
Everything you need to use this pin correctly: status, alternate functions, boot-time cautions and working code.
| Status | Usable |
|---|---|
| Alternate functions | USB D+ (USB Serial/JTAG) |
| Chip | ESP32-S3 pinout |
Watch out：
- Native USB pin. Using it as ordinary IO disables USB download and debugging.
Practical notes
Native USB D+ (USB Serial/JTAG), paired with GPIO19 and equally unavailable as GPIO. If you must reclaim it, switch to UART0 (GPIO43/44) for flashing and accept losing USB.
Sample code
// Arduino
const int PIN = 20;
void setup() {
pinMode(PIN, OUTPUT);
}
void loop() {
digitalWrite(PIN, HIGH);
delay(500);
digitalWrite(PIN, LOW);
delay(500);
}
Data verified：2026-10-20 · Cross-checked against Espressif documentation. Always confirm against the official datasheet before finalizing a design. Official docs →